Power Source Mode does not Change to ON (IG and ACC) [03/2017 - 12/2017]: Description

If any of the following operations are performed, the certification ECU (smart key ECU assembly) receives a signal, and changes the power source mode.

• With the electrical key transmitter sub-assembly in the cabin, the engine switch is pressed.
• When the transmitter battery in the electrical key transmitter sub-assembly is depleted, touch the electrical key transmitter sub-assembly to the surface of the engine switch while depressing the brake pedal*1 or clutch pedal*2.
• When the entry cancel function is set by customize operation, touch the electrical key transmitter sub-assembly to the surface of the engine switch while depressing the brake pedal*1 or clutch pedal*2.
  • *1: for Automatic Transmission
  • *2: for Manual Transmission

HINT: 

When the battery cable is disconnected and reconnected, the power source returns to the mode it was in before the battery cable was disconnected.