LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> 86 Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Engine Coolant Temperature Sensor >> Removal [06/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [06/2016 - ]: Procedure

  1. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 1

  2. REMOVE INTAKE MANIFOLD 

    (Refer to REMOVAL [06/2016 - ] )

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
      GTY388258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 19 mm union nut wrench, remove the engine coolant temperature sensor.
      GTY388259Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals