Caution / Notice / Hint

NOTE:

Before performing troubleshooting, inspect the connectors of related circuits.
If DTC C1782 (Power Source Voltage Malfunction) is output at the same time, perform troubleshooting for C1782 first.
Refer to DTC C1782: Low Battery Positive Voltage [04/2018 -]
Before replacing the absorber control ECU, perform all of the following:
- Symptom simulation.
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -]
- DTC inspection.
  Refer to DTC CHECK / CLEAR [04/2018 -]
- Techstream inspection.
  Refer to DATA LIST / ACTIVE TEST [04/2018 - 08/2019] , or refer to DATA LIST / ACTIVE TEST [08/2019 -]
  - If no malfunctions are found in other areas, replace the absorber control ECU.
After replacing the absorber control ECU with a new one, perform registration of vehicle identification information.
Refer to TEST MODE PROCEDURE [04/2018 -]