LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> C-HR LE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostic Codes & Symptom Tests >> Meter / Gauge System >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0151: Lost Communication with Restraints Control Module; DTC U0182: Lost Communication with Lighting Control Module Front; DTC U0235: Lost Communication with Cruise Control Front Distance Range Sensor; DTC U023A: Lost Communication with Front Camera Module [09/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0151: Lost Communication with Restraints Control Module; DTC U0182: Lost Communication with Lighting Control Module Front; DTC U0235: Lost Communication with Cruise Control Front Distance Range Sensor; DTC U023A: Lost Communication with Front Camera Module [09/2019 - ]: Description

The combination meter assembly communicates with the ECM, brake actuator assembly (skid control ECU), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag sensor assembly, headlight ECU sub-assembly LH*1, front camera module*2, millimeter wave radar sensor assembly*2 via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
U0100 Lost Communication with ECM / PCM "A" When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with ECM continues for 2 seconds or more
  • ECM
  • CAN communication system
  • Combination meter assembly
DTC stored -
U0129 Lost Communication with Brake System Control Module When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with brake actuator assembly (skid control ECU) continues for 3 seconds or more
  • Skid control ECU (brake actuator assembly)
  • CAN communication system
  • Combination meter assembly
DTC stored -
U0131 Lost Communication with Power Steering Control Module When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with power steering ECU assembly continues for 3 seconds or more
  • Power steering ECU assembly
  • CAN communication system
  • Combination meter assembly
DTC stored -
U0142 Lost Communication with Body Control Module "B" When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more
  • Main body ECU (multiplex network body ECU)
  • CAN communication system
  • Combination meter assembly
DTC stored -
U0151 Lost Communication with Restraints Control Module When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with airbag sensor assembly continues for 10 seconds or more
  • Airbag sensor assembly
  • CAN communication system
  • Combination meter assembly
DTC stored -
U0182 Lost Communication with Lighting Control Module Front When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with headlight control ECU sub-assembly LH continues for 10 seconds or more
  • Headlight ECU sub-assembly LH
  • CAN communication system
  • Combination meter assembly
DTC stored *1
U0235 Lost Communication with Cruise Control Front Distance Range Sensor When IG voltage is 9.5 V or more and the following condition is detected:
  • No communication with millimeter wave radar sensor assembly continues for 10 seconds or more
  • Millimeter wave radar sensor assembly
  • CAN communication system
  • Combination meter assembly
DTC stored *2
U023A Lost Communication with Front Camera Module When IG voltage is 9.5 V or more and either of the following conditions is met:
  • No communication with forward recognition camera continues for 10 seconds or more
  • Forward recognition camera
  • CAN communication system
  • Combination meter assembly
DTC stored *2
  1. *1: w/ Headlight ECU
  2. *2: w/ Toyota Safety Sense