LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> Camry LE >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Meter / Gauge System - Diagnostic Codes & Symptom Tests (Except Hybrid) >> Meter / Gauge System >> DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0131-87: Lost Communication with Power Steering Control Module Missing Message; DTC U0142-87: Lost Communication with Body Control Module "B" Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U0233-87: Lost Communication with Side Obstacle Detection Control Module "B" Missing Message; DTC U023A-87: Lost Communication with Image Processing Module "A" Missing Message; DTC U0327-87: Software Incompatibility with Vehicle Security Control Module Missing Message; DTC U1106-87: Lost Communication with Electric Parking Brake Module Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message; DTC U1112-87: Lost Communication with Combination Switch Module Missing Message; DTC U1133-87: Lost Communication with PMN Module Missing Message [08/2021 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0131-87: Lost Communication with Power Steering Control Module Missing Message; DTC U0142-87: Lost Communication with Body Control Module "B" Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U0233-87: Lost Communication with Side Obstacle Detection Control Module "B" Missing Message; DTC U023A-87: Lost Communication with Image Processing Module "A" Missing Message; DTC U0327-87: Software Incompatibility with Vehicle Security Control Module Missing Message; DTC U1106-87: Lost Communication with Electric Parking Brake Module Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message; DTC U1112-87: Lost Communication with Combination Switch Module Missing Message; DTC U1133-87: Lost Communication with PMN Module Missing Message [08/2021 - ]: Description

The combination meter assembly communicates with each ECU via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
U0100-87 Lost Communication With ECM/PCM "A" Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with ECM

Malfunction Time:

  1. 3.6 seconds or more
  • ECM
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0114-87 Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with 4WD ECU assembly

Malfunction Time:

  1. 5.0 seconds or more
  • 4WD ECU assembly
  • CAN communication system
  • Combination meter assembly
 DTC stored For AWD
U0129-87 Lost Communication with Brake System Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with skid control ECU (brake actuator assembly)

Malfunction Time:

  1. 1.0 seconds or more
  • Skid control ECU (Brake actuator assembly)
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0131-87 Lost Communication with Power Steering Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with power steering ECU (rack and pinion power steering gear assembly)

Malfunction Time:

  1. 3.6 seconds or more
  • Power steering ECU (Rack and pinion power steering gear assembly)
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0142-87 Lost Communication with Body Control Module "B" Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with main body ECU (multiplex network body ECU)

Malfunction Time:

  1. 5.0 seconds or more
  • Main body ECU (Multiplex network body ECU)
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0151-87 Lost Communication with Restraints Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with airbag sensor assembly

Malfunction Time:

  1. 5.0 seconds or more
  • Airbag sensor assembly
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0163-87 Lost Communication with Navigation Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with radio and display receiver assembly

Malfunction Time:

  1. 5.0 seconds or more
  • Radio and display receiver assembly
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0164-87 Lost Communication with HVAC Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with air conditioning amplifier assembly

Malfunction Time:

  1. 5.0 seconds or more
  • Air conditioning amplifier assembly
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0233-87 Lost Communication with Side Obstacle Detection Control Module "B" Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with blind spot monitor sensor RH (B)

Malfunction Time:

  1. 5.0 seconds or more
  • Blind spot monitor sensor RH (B)
  • CAN communication system
  • Combination meter assembly
 DTC stored w/ Blind Spot Monitor System
U023A-87 Lost Communication with Image Processing Module "A" Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with forward recognition camera

Malfunction Time:

  1. 5.0 seconds or more
  • Forward recognition camera
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U0327-87 Software Incompatibility with Vehicle Security Control Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with certification ECU (smart key ECU assembly)

Malfunction Time:

  1. 5.0 seconds or more
  • Certification ECU (Smart key ECU assembly)
  • CAN communication system
  • Combination meter assembly
 DTC stored w/ Smart Key System
U1106-87 Lost Communication with Electric Parking Brake Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with skid control ECU (brake actuator assembly)

Malfunction Time:

  1. 3.6 seconds or more
  • Skid control ECU (Brake actuator assembly)
  • CAN communication system
  • Combination meter assembly
 DTC stored w/ Electric Parking Brake System
U1110-87 Lost Communication with Intuitive Parking Assist Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with clearance warning ECU assembly

Malfunction Time:

  1. 5.0 seconds or more
  • Clearance warning ECU assembly
  • CAN communication system
  • Combination meter assembly
 DTC stored w/ Parking Support Brake System
U1112-87 Lost Communication with Combination Switch Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with steering sensor

Malfunction Time:

  1. 10.0 seconds or more
  • Steering sensor
  • CAN communication system
  • Combination meter assembly
 DTC stored -
U1133-87 Lost Communication with PMN Module Missing Message Diagnosis Condition:
  • The ignition switch is ON
  • IG power source voltage is 9.5 V or more

Malfunction Status:

  1. No communication with certification ECU (smart key ECU assembly)

Malfunction Time:

  1. 3.6 seconds or more
  • Certification ECU (Smart key ECU assembly)
  • CAN communication system
  • Combination meter assembly
 DTC stored w/ Smart Key System
scientia non olet · About LEMON Manuals