DTC P0505: Idle Control System [08/2014 - 08/2016]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Powertrain > Engine and ECT > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0505 is output	A
   DTC P0505 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0505 are output, troubleshoot those DTCs first.

Result:  2

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2014 - 08/2015]  Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2016] 

Result:  1

A 

See step  2

1. Check the PCV hose connections.

   Refer to COMPONENTS [08/2013 - ]

   OK

   PCV valve and hose are connected correctly and are not damaged.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

REPAIR OR REPLACE PCV HOSE 

Result:  1

OK 

See step  3

1. Check the intake system for vacuum leaks.

   Refer to ON-VEHICLE INSPECTION [08/2013 - 08/2016]

   OK

   No leaks from the intake system.

   HINT: 

   Perform "Inspection After Repair" after repairing or replacing the intake system.

   Refer to INITIALIZATION [08/2013 - 08/2016]

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

REPAIR OR REPLACE INTAKE SYSTEM 

Result:  1

OK 

See step  4

1. Check the throttle body assembly condition.

   OK

   Throttle valve is not contaminated with foreign matter and moves smoothly.

   HINT: 

   Perform "Inspection After Repair" after replacing the throttle body assembly.

   Refer to INITIALIZATION [08/2013 - 08/2016]

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

REPLACE THROTTLE BODY ASSEMBLY. Refer to  REMOVAL [08/2013 - 08/2016] 

Result:  1

OK 

See step  5

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [08/2013 - ]

   Powertrain > Engine and ECT > Clear DTCs 

5. Turn the ignition switch off and wait for at least 30 seconds.
6. Turn the ignition switch to ON.
7. Turn the Techstream on.
8. Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
9. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
10. Read the pending DTCs.

    Powertrain > Engine and ECT > Trouble Codes 

    Result

    Result	Proceed to
    DTC P0505 is output	A
    DTCs are not output	B

Result:  1

A 

REPLACE ECM. Refer to  REMOVAL [08/2013 - 08/2016] 

Result:  2

B 

END