Service Data [11/2022 - 09/2024]: Notes

Measurement Points (for Double Wishbone Type Suspension): 

1. A: Ground clearance of front wheel center

1. B: Ground clearance of center of bolt head of front lower No. 1 suspension arm sub-assembly and front suspension crossmember sub-assembly.

1. C: Ground clearance of rear wheel center

1. D: Ground clearance of center of bolt head of rear No. 2 suspension arm assembly and rear suspension member sub-assembly.

Measurement Points (for Torsion Beam Type Suspension): 

1. A: Ground clearance of front wheel center

1. B: Ground clearance of center of bolt head of front lower No. 1 suspension arm sub-assembly and front suspension crossmember sub-assembly.

1. C: Ground clearance of rear wheel center

1. D: Ground clearance of rear axle beam bushing set bolt center