Operation Check [08/2016 - ]
WARNING: This page is about a different car, the 2018 Toyota Corolla, 2017 Toyota Corolla, 2016 Toyota Corolla, 2015 Toyota Corolla, and 2014 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK PRE-COLLISION SYSTEM SETTING
- Turn the ignition switch to ON.
- Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on.
HINT:
When the ignition switch is turned to ON, the PCS will turn on. This can be changed through a customize setting using the Techstream.
- Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.
*a PCS Warning Light
- CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING
- Turn the ignition switch to ON.
- Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.
HINT:
- The pre-collision system warning timing status remains unchanged when the ignition switch is turned off and back to ON. This can be changed through a customize setting using the Techstream.
- The default setting is "Mid".