DTC P1D06-450: U Phase IPM Overcurrent; DTC P1D07-450: V Phase IPM Overcurrent; DTC P1D08-450: W Phase IPM Overcurrent; DTC P1D09-450: X Phase IPM Overcurrent [06/2015 - ]: Description
Refer to high voltage system diagram for the System Description.
Refer to SYSTEM DESCRIPTION [06/2015 - ]
If an overcurrent occurs in the FC converter assembly, the FC boost control ECU detects a malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate |
|---|---|---|---|---|
| P1D06-450 | U Phase IPM Overcurrent | U phase fail signal is detected. (Overcurrent) (1 trip detection logic) |
|
Master Warning Light: Comes on |
| P1D07-450 | V Phase IPM Overcurrent | V phase fail signal is detected. (Overcurrent) (1 trip detection logic) |
|
Master Warning Light: Comes on |
| P1D08-450 | W Phase IPM Overcurrent | W phase fail signal is detected. (Overcurrent) (1 trip detection logic) |
|
Master Warning Light: Comes on |
| P1D09-450 | X Phase IPM Overcurrent | X phase fail signal is detected. (Overcurrent) (1 trip detection logic) |
|
Master Warning Light: Comes on |
HINT:
If the inverter is malfunctioning, DTCs related to the inverter are also output to the EV control ECU.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P1D06-450 |
|
| P1D07-450 |
|
| P1D08-450 |
|
| P1D09-450 |
|