DTC C1AA3: Vehicle Speed Sensor Circuit [11/2015 - 12/2018]: Procedure

HINT: 

If DTC C1AA3 is stored, the electronically controlled brake system may be malfunctioning. Check for DTCs related to the electronically controlled brake system first.

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [11/2015 - 12/2018]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   Result

   Result	Proceed to
   Electronically controlled brake system DTCs are not output	A
   Electronically controlled brake system DTCs are output	B

Result: 

B 

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2015 - 12/2018] 

Result: 

A 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2015 - 07/2020]

   Chassis > Front Recognition Camera > Clear DTCs 

2. Perform the following procedure.

   HINT: 

   If the following procedure is not performed, the previously output DTC cannot be detected.

   1. Turn the power switch on (IG) and wait 7 seconds or more.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [11/2015 - 07/2020]

   Chassis > Front Recognition Camera > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1AA3 is not output	A
   DTC C1AA3 is output	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2015 - 12/2018] 

Result: 

B 

See step  3

1. Replace the forward recognition camera.

   Refer to REMOVAL [11/2015 - 07/2020]

2. Perform Forward Recognition Camera Learning.

   Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [11/2015 - 07/2020]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2015 - 07/2020]

   Chassis > Front Recognition Camera > Clear DTCs 

2. Perform the following procedure.

   HINT: 

   If the following procedure is not performed, the previously output DTC cannot be detected.

   1. Turn the power switch on (IG) and wait 7 seconds or more.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [11/2015 - 07/2020]

   Chassis > Front Recognition Camera > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1AA3 is not output	A
   DTC C1AA3 is output	B

Result: 

A 

END (FORWARD RECOGNITION CAMERA WAS DEFECTIVE) 

Result: 

B 

REPLACE SKID CONTROL ECU (BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY). Refer to  COMPONENTS [11/2015 - ]