April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [11/2015 - ]: Procedure

REMOVE REAR MOTOR UNDER COVER LH
Refer to PROCEDURE - Step 1
DRAIN ENGINE COOLANT (for Engine)
Refer to PROCEDURE - Step 2 [11/2015 - 08/2016] , or refer to PROCEDURE - Step 2 [08/2016 - 07/2020] , or refer to PROCEDURE - Step 2 [07/2020 - ]
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 13 [11/2015 - 08/2016] , or refer to PROCEDURE - Step 13 [08/2016 - 12/2018] , or refer to PROCEDURE - Step 13 [12/2018 - 07/2020] , or refer to PROCEDURE - Step 13 [07/2020 - ]

REMOVE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR

Disconnect the No. 2 engine coolant temperature sensor connector.

GTY550061

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the clip and No. 2 engine coolant temperature sensor from the radiator pipe assembly.

GTY550062

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.

REMOVE EGR PIPE ASSEMBLY
Refer to PROCEDURE - Step 8

REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Disconnect the engine coolant temperature sensor connector.

GTY550089

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using SST, remove the engine coolant temperature sensor from the water outlet.

GTY585737

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1

Gasket

SST: 09817-33191

NOTE:

If the engine coolant temperature sensor has been struck or dropped, replace it.

Remove the gasket from the engine coolant temperature sensor.