Customize Parameters [11/2018 - ]
WARNING: This page is about a different variant/trim than selected.
- CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Seat.
- Select the setting by referring to the table below.
Seat
Tester Display Description Default Setting ECU Auto Operation Interference Avoidance Function Setting for availability of auto adjustment function that avoids interference between headrest and roof headlining during driver seat operation. ON 0:ON, 1:OFF Position control ECU assembly