Installation [10/2019 - ]: Procedure

INSTALL NO. 1 CONVERTER CONTROL BRACKET
1. Install the No. 1 converter control bracket to the eco-run vehicle converter assembly with the 2 bolts.
  Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf)

INSTALL ECO-RUN VEHICLE CONVERTER ASSEMBLY

Install the eco-run vehicle converter assembly with the 2 nuts.
Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf)

Connect the connector to the eco-run vehicle converter assembly and move the lock lever to lock the connector.

*a	Lock Lever

INSTALL FRONT BUMPER ASSEMBLY
- for Off Road Package:
  Refer to INSTALLATION [02/2019 - 08/2020] , or refer to INSTALLATION [08/2020 - 12/2021] , or refer to INSTALLATION [12/2021 - ]
- except Off Road Package:
  Refer to INSTALLATION [02/2019 - 08/2020] , or refer to INSTALLATION [08/2020 - 12/2021] , or refer to INSTALLATION [12/2021 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [10/2019 - 06/2020] , or refer to INITIALIZATION [06/2020 - 08/2020] , or refer to INITIALIZATION [08/2020 - 12/2021] , or refer to INITIALIZATION [12/2021 - 10/2022] , or refer to INITIALIZATION [10/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]