Customize Parameters [11/2018 - 08/2020]

HINT: 

The following items can be customized.

1. Customizing with the Techstream
   1. Connect the Techstream to the DLC3.
   2. Turn the ignition switch to ON.
   3. Turn the Techstream on.
   4. Enter the following menus: Customize Setting / Wireless Door Lock.
   5. Select the setting by referring to the table below.

      Wireless Door Lock 

      Tester Display	Description	Default	Setting	ECU
      Wireless Control	Function that turns the wireless door lock control system on or off	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Hazard Answer Back	Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Open Door Warning	Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Unlock 2 Operation	Function that unlocks the driver door when the unlock switch on the door control transmitter module set sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors.	ON*2 OFF*1	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Panic Function	Function to operate theft deterrent system by pressing panic switch on electrical key transmitter sub-assembly for 0.8 seconds	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Auto Lock Time	Function that regulates the interval between unlocking and automatic relocking of the doors	30 s*1 60 s*2	00:30 s, 01:60 s, 10:120 s	Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Resp	Wireless door lock buzzer response*2	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      P/W Wireless Ope Buzz	Function that enables/disables the wireless power window buzzer response	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Vol	Wireless door lock buzzer volume*2	Level5	0000:Level7, 0001:Level6, 0010:Level5, 0011:Level4, 0100:Level3, 0101:Level2, 0110:Level1, 0111:Level0	Main body ECU (Multiplex network body ECU)
      Wireless Lock Function with Doors Open	Wireless door lock function with doors open*2	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)

      1. *1: w/o Wireless Door Lock Buzzer Answer back Function
      2. *2: w/ Wireless Door Lock Buzzer Answer back Function
2. Customizing with the multi-display
   1. Turn the ignition switch to ON.
   2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.
   3. Select the setting by referring to the table below.

      Display	Description	Default	Setting	Relevant ECU
      Remote 2-press unlock	Function that unlocks the driver door when the unlock switch on the door control transmitter module set sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors.	On*2 Off*1	On or Off	Main body ECU (Multiplex network body ECU)
      Auto relock timer	Function that regulates the interval between unlocking and automatic relocking of the doors	30 sec.*1 60 sec.*2	30 sec, 60 sec or 120 sec	Main body ECU (Multiplex network body ECU)
      Lock/unlock feedback lights	Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation	On	On or Off	Main body ECU (Multiplex network body ECU)
      Lock/unlock feedback-volume	Wireless door lock buzzer volume*2	5 bars	Off, 1, 2, 3, 4, 5, 6 or 7	Main body ECU (Multiplex network body ECU)
      Wireless Lock When Door Opened	Wireless door lock function with doors open*2	ON	On or Off	Main body ECU (Multiplex network body ECU)

      1. *1: w/o Wireless Door Lock Buzzer Answer back Function
      2. *2: w/ Wireless Door Lock Buzzer Answer back Function