| When Using Direct Injection |
- |
| Duration that both of the following conditions (a) and (b) are met |
10 seconds or more |
| (a) Difference in fuel pressure between actual and target |
Less than -5 MPa (-51.0 kgf/cm2
, -725 psi) |
| (b) Actual discharge rate of high pressure fuel pump |
240 mm3
/st or more |
| When Using Only Port Injection |
- |
| Duration that both of the following conditions (a) and (b) are met |
15 seconds or more |
| (a) Difference in fuel pressure between actual and target |
Less than -2 MPa (-20.4 kgf/cm2
, -290 psi) |
| (b) Actual discharge rate of high pressure fuel pump |
125 mm3
/st or more |