DTC P00B1-11: Radiator Coolant Temperature Sensor Circuit Short to Ground [11/2018 - 08/2020]: Procedure

1. Inspect the No. 2 engine coolant temperature sensor.

   Refer to PROCEDURE - Step 2

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR. Refer to  REMOVAL [11/2018 - 08/2020] 

Result: 

OK 

See step  2

1. Disconnect the No. 2 engine coolant temperature sensor connector.
2. Disconnect the ECM connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   A79-2 or C40-129 (THW3) - Body ground and other terminals	Always	10 kΩ or higher

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE ECM. Refer to  REMOVAL [11/2018 - 08/2020] 

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR