DTC P2111-72: Throttle Actuator "A" Control System Actuator Stuck Open; DTC P2111-73: Throttle Actuator "A" Control System Actuator Stuck Closed [02/2019 - 06/2020]: Description
WARNING: This page is about a different variant/trim than selected.
The throttle actuator is operated by the ECM and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position sensor, which is built into the throttle body with motor assembly. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to appropriately control the throttle actuator and monitor the throttle opening angle as the ECM responds to a request from the hybrid system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P2111-72 | Throttle Actuator "A" Control System Actuator Stuck Open | The ECM signals the throttle actuator to close, but the actuator is stuck (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P2111 |
| P2111-73 | Throttle Actuator "A" Control System Actuator Stuck Closed | The ECM signals the throttle actuator to open, but the actuator is stuck (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P2112 |