DTC P0016-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A [02/2019 - 10/2019]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0010-01.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0016-00 | Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A | Deviation in the crankshaft position sensor signal and camshaft position sensor (for intake camshaft) signal (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0016 |
HINT:
If initialization is performed using the Techstream with any of the connectors of the wire harnesses between the power source or ECM and the cam timing control motor with EDU assembly disconnected, DTC P0016-00 may be stored. If DTC P0016-00 is output, check the connection condition of each connector.