Monitor Description
WARNING: This page is about a different variant/trim than selected.
The ECM monitors the operation of the throttle actuator. When a malfunction is detected in the throttle actuator cut circuit immediately after the ignition switch is turned off, the ECM illuminates the MIL and stores a DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P16B0-9F | Actuator Cut Circuit Stuck Off | ECM main CPU malfunction (1 trip detection logic). | ECM | Comes on | DTC stored | SAE Code: P16B0 |