DTC P2614-01: Camshaft Position Signal Output "A" General Electrical Failure [02/2019 - 06/2020]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0010-01.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P2614-01 | Camshaft Position Signal Output "A" General Electrical Failure | Malfunction in rotation sensor of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P2614 |
SYMPTOMS AND FAIL-SAFE OPERATION DURING CAMSHAFT CONTROL MOTOR MALFUNCTION
| Vehicle Condition | Fail-Safe |
|---|---|
|
The cam timing control motor with EDU assembly is operated to the most retarded position. |