Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Vehicle Control History may be stored in the hybrid vehicle control ECU assembly if the engine is malfunctioning. Certain vehicle condition information is recorded when Vehicle Control History is stored. Reading the vehicle conditions recorded in both the freeze frame data and Vehicle Control History can be useful for troubleshooting.
Refer to VEHICLE CONTROL HISTORY [02/2019 - ]
(Select Powertrain in Health Check and then check the time stamp data.)
- If any "Engine Malfunction" Vehicle Control History item has been stored in the hybrid vehicle control ECU assembly, make sure to clear it. However, as all Vehicle Control History items are cleared simultaneously, if any Vehicle Control History items other than "Engine Malfunction" are stored, make sure to perform any troubleshooting for them before clearing Vehicle Control History.
Refer to VEHICLE CONTROL HISTORY [02/2019 - ]
HINT:
- When DTCs P3190-00, P3191-00 and P3193-00 are output, the engine may stop.
In this case, after adding fuel or performing repairs, clear the DTCs. Then turn the ignition switch off to return to the normal condition.
- When this DTC is output and the engine is stopped, the HV battery cannot be charged since the vehicle is driven with the motor only. If the vehicle continues to be driven under this condition, the HV battery will become depleted and the ignition switch will not be able to be turned to ON (READY).