Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
P0489: EGR A CIRCUIT RANGE CHECK (LOW VOLTAGE)
| Either of the following conditions is met | - |
| Motor phase A positive terminal voltage detected by motor driver IC | 0.2 V or less |
| Motor phase A negative terminal voltage detected by motor driver IC | 0.2 V or less |
P0489: EGR B CIRCUIT RANGE CHECK (LOW VOLTAGE)
| Either of the following conditions is met | - |
| Motor phase B positive terminal voltage detected by motor driver IC | 0.2 V or less |
| Motor phase B negative terminal voltage detected by motor driver IC | 0.2 V or less |
P0490: EGR A CIRCUIT RANGE CHECK (HIGH CURRENT)
| One of the following conditions is met | - |
| Motor phase A positive terminal current detected by motor driver IC | 1.2 A or more |
| Motor driver MOSFET temperature for motor phase A positive terminal detected by motor driver IC | 150°C (302°F) or higher |
| Motor phase A negative terminal current detected by motor driver IC | 1.2 A or more |
| Motor driver MOSFET temperature for motor phase A negative terminal detected by motor driver IC | 150°C (302°F) or higher |
P0490: EGR B CIRCUIT RANGE CHECK (HIGH CURRENT)
| One of the following conditions is met | - |
| Motor phase B positive terminal current detected by motor driver IC | 1.2 A or more |
| Motor driver MOSFET temperature for motor phase B positive terminal detected by motor driver IC | 150°C (302°F) or higher |
| Motor phase B negative terminal current detected by motor driver IC | 1.2 A or more |
| Motor driver MOSFET temperature for motor phase B negative terminal detected by motor driver IC | 150°C (302°F) or higher |