Initialization [11/2018 - 10/2022]
WARNING: This page is about a different variant/trim than selected.
- INITIALIZE PANORAMIC VIEW MONITOR SYSTEM
- When "!" mark is displayed on the radio and display receiver assembly, correct the steering angle neutral point using the following method.
- Fully turn the steering wheel to the left and right on flat ground.NOTE:
Memorizing the steering angle neutral point must be carried out with the power switch on (READY). Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.
HINT:
If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right, perform Steering Angle Setting in Calibration.
Refer to CALIBRATION [11/2018 - 10/2022]
- Fully turn the steering wheel to the left and right on flat ground.
- When "!" mark is displayed on the radio and display receiver assembly, correct the steering angle neutral point using the following method.