Freeze Frame Data [12/2021 - ]

WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, and 2022 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

FREEZE FRAME DATA
1. Whenever a lighting system DTC is stored, the forward recognition camera stores the current vehicle state as freeze frame data.

CHECK FREEZE FRAME DATA

Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus:
1. Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
  Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes

Select a DTC to display its freeze frame data.

Body Electrical > Front Recognition Camera (Front Lighting Control)

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Total Distance Traveled	Actual driving distance	0 to 16777215	Roughly the same as the actual driving distance	-
Total Distance Traveled - Unit	Actual driving distance unit	km or mile	Displays the current actual driving distance unit	-
AHB/AHS Information	Lighting system state	unknown, AHB or AHS	Displays lighting system state	-

CLEAR FREEZE FRAME DATA
NOTE:
Clearing the DTCs will also clear the freeze frame data.
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Clear the DTCs and freeze frame data.
4. Enter the following menus:
  1. Body Electrical / Front Recognition Camera (Front Lighting Control) / Clear DTCs.
    Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs