DTC Check / Clear [11/2018 - ]

CHECK DTC
1. Turn the ignition switch off.
2. Connect the GTD to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
  Body Electrical > Master Switch > Trouble Codes
  
  Body Electrical > D-Door Motor > Trouble Codes
  
  Body Electrical > P-Door Motor > Trouble Codes
  
  Body Electrical > RL-Door Motor > Trouble Codes
  
  Body Electrical > RR-Door Motor > Trouble Codes
6. Check the details of the DTC(s).
  Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2018 - ]
CLEAR DTC
1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
  Body Electrical > Master Switch > Clear DTCs
  
  Body Electrical > D-Door Motor > Clear DTCs
  
  Body Electrical > P-Door Motor > Clear DTCs
  
  Body Electrical > RL-Door Motor > Clear DTCs
  
  Body Electrical > RR-Door Motor > Clear DTCs
6. Clear the DTCs.