Diagnostic Trouble Code Chart [08/2015 - 08/2017]
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See Proceed to" below.
POWER STEERING SYSTEM
| DTC Code | Detection Item | Trouble Area | Return to normal | Proceed to |
|---|---|---|---|---|
| C1231 | Lost Communication with Steering Angle Sensor Module | - Steering angle sensor - CAN communication system - Power steering ECU assembly |
After normal condition | Refer to DTC C1231: Lost Communication with Steering Angle Sensor Module [08/2015 - 08/2017] |
| C1531 | ECU Malfunction | - Harness or connector - Vane pump assembly (Power steering solenoid valve) - Power steering ECU assembly |
Ignition switch turned to ON again | Refer to DTC C1531: ECU Malfunction [08/2015 - 08/2017] |
| C1544 | High Engine Revolution Signal | - SFI system - CAN communication system - Power steering ECU assembly |
After normal condition | Refer to DTC C1544: High Engine Revolution Signal [08/2015 - 08/2017] |
| C1547 | Vehicle Speed Sensor | - Speed sensor circuit - Brake control system - CAN communication system - Power steering ECU assembly |
After normal condition | Refer to DTC C1547: Vehicle Speed Sensor [08/2015 - 08/2017] |
| U0073 | Control Module Communication Bus Off | - CAN communication system | After CAN communication system returns to normal condition or ignition switch turned to ON again | Refer to DTC U0073: Control Module Communication Bus Off [08/2015 - 08/2017] |