LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> Sienna XLE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [2GR-FKS] (Service Information) >> Mass Air Flow Meter >> Removal [08/2016 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [08/2016 - ]: Procedure

  1. REMOVE MASS AIR FLOW METER 
    1. Disengage the wire harness clamp.
    2. Disconnect the mass air flow meter connector.
    3. Remove the 2 screws and mass air flow meter from the air cleaner cap sub-assembly.
      NOTE:

      If the mass air flow meter has been struck or dropped, replace it.

      GTY695415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals