Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [08/2015 - ]: Procedure
- CHECK FOR DTC
- Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ]
).RESULT
Result Proceed to DTC is not output A DTC B2311 is output B DTC B2312 is output C DTC B2313 is output D LIN communication system DTCs are output E
Result:
B
GO TO DTC (B2311)
(Refer to DTC B2311: Power Window Motor Malfunction [08/2015 - ] )
Result:
C
GO TO DTC (B2312)
(Refer to DTC B2312: Power Window Switch Malfunction [08/2015 - 08/2017] , or refer to DTC B2312: Power Window Switch Malfunction [08/2017 - ] )
Result:
D
GO TO DTC (B2313)
(Refer to DTC B2313: Glass Position Initialization Incomplete [08/2015 - ] )
Result:
E
GO TO LIN COMMUNICATION SYSTEM
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] )
Result:
A
See step 2
- Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ]
).
- CHECK MANUAL UP / DOWN FUNCTION
- Check that the manual UP/DOWN function using the master switch can operate the driver side power window (Refer to OPERATION CHECK [08/2015 - 08/2017]
, or refer to OPERATION CHECK [08/2017 - ]
).
OK
Manual UP/DOWN function operates normally.
Result:
NG
GO TO FLOWCHART (DRIVER SIDE MOTOR CIRCUIT)
(Refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2015 - 08/2017] , or refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2017 - ] )
Result:
OK
See step 3
- Check that the manual UP/DOWN function using the master switch can operate the driver side power window (Refer to OPERATION CHECK [08/2015 - 08/2017]
, or refer to OPERATION CHECK [08/2017 - ]
).
- READ VALUE USING TECHSTREAM (MASTER SWITCH)
- Use the Data List to check if the master switch is functioning properly.MASTER SWITCH
Tester Display Measurement Item/Range Normal Condition Diagnostic Note D Door P/W Auto SW Driver side power window auto UP/ DOWN switch signal / ON or OFF ON: Driver side switch operated
OFF: Driver side switch not operated- OK
The Techstream display changes normally when master switch is operated.
Result:
OK
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(Refer to REMOVAL [08/2015 - 08/2017] , or refer to REMOVAL [08/2017 - ] )
Result:
NG
REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(Refer to REMOVAL [08/2015 - 08/2017] , or refer to REMOVAL [08/2017 - ] )
- Use the Data List to check if the master switch is functioning properly.