Installation [08/2017 - ]: Procedure

INSTALL TRAILER BRAKE CONTROL ECU (BRAKE CONTROL WITH BRACKET RELAY)
1. Connect the connector.
2. Install the trailer brake control switch with the 2 bolts.
  Torque
  
  xx N*m (xx kgf*cm, xx in.*lbf)
INSTALL NO. 2 SWITCH HOLE BASE
Refer to PROCEDURE - Step 25 [08/2017 - 08/2019], or refer to PROCEDURE - Step 26 [08/2019 - ]
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 30 [08/2017 - 08/2019], or refer to PROCEDURE - Step 31 [08/2019 - ]
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 28 [08/2017 - 08/2018], or refer to PROCEDURE - Step 30 [08/2018 - 08/2019], or refer to PROCEDURE - Step 31 [08/2019 - ]
INSTALL FRONT DOOR SCUFF PLATE LH
- for CrewMax: Refer to PROCEDURE - Step 33 [08/2017 - 08/2018], or refer to PROCEDURE - Step 35 [08/2018 - 08/2019], or refer to PROCEDURE - Step 36 [08/2019 - ]
- for Double Cab: Refer to PROCEDURE - Step 32 [08/2017 - 08/2018], or refer to PROCEDURE - Step 34 [08/2018 - 08/2019], or refer to PROCEDURE - Step 35 [08/2019 - ]
INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 36 [08/2017 - 08/2019], or refer to PROCEDURE - Step 37 [08/2019 - ]