DTC U0001-88: High Speed CAN Communication Bus bus off; DTC U0100-00: Lost Communication With ECM/PCM "A"; DTC U0101-00: Lost Communication with TCM; DTC U0121-00: Lost Communication With Anti-Lock Brake System (ABS) Control Module; DTC U0151-00: Lost Communication With Restraints Control Module; DTC U0155-00: Lost Communication With Instrument Panel Cluster (IPC) Control Module; DTC U0214-00: Lost Communication With Remote Function Actuation [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U0001-88	High Speed CAN Communication Bus bus off	Module communication error (HS-CAN)	Not applicable	DTC Stored	Applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0100-00	Lost Communication With ECM/PCM "A"	Communication error with ECM	Not applicable	DTC Stored	Applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0101-00	Lost Communication with TCM	Communication error with TCM	Not applicable	DTC Stored	Not applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0121-00	Lost Communication With Anti-Lock Brake System (ABS) Control Module	Communication error with brake actuator	Not applicable	DTC Stored	Not applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0151-00	Lost Communication With Restraints Control Module	Communication error with center airbag sensor assembly	Not applicable	DTC Stored	Not applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0155-00	Lost Communication With Instrument Panel Cluster (IPC) Control Module	Communication error with combination meter	Not applicable	DTC Stored	Applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test
U0214-00	Lost Communication With Remote Function Actuation	Communication error with engine stop and start ECU	Not applicable	DTC Stored	Applicable	Drive cycle: Not applicable Self test type: CM DTC self test, OD DTC self test

DTC Detection Condition	U0001-88 Module communication error (HS-CAN) U0100-00 Communication error with ECM U0101-00 Communication error with TCM U0121-00 Communication error with brake actuator U0151-00 Communication error with center airbag sensor assembly U0155-00 Communication error with combination meter U0214-00 Communication error with engine stop and start ECU
DTC Detection Condition	U0001-88 Main body ECU detects the CAN bus communication line (HS-CAN) malfunction 10 times continuously with the ignition switched ON (engine off or on). U0100-00 Main body ECU could not receive the CAN signal from the ECM for 5 s or more with the ignition switched ON (engine off or on). U0101-00 Main body ECU could not receive the CAN signal from the TCM for 5 s or more with the ignition switched ON (engine off or on). U0121-00 Main body ECU could not receive the CAN signal from the brake actuator for 5 s or more with the ignition switched ON (engine off or on). U0151-00 Main body ECU could not receive the CAN signal from the center airbag sensor assembly for 5 s or more with the ignition switched ON (engine off or on). U0155-00 Main body ECU could not receive the CAN signal from the combination meter for 5 s or more with the ignition switched ON (engine off or on). U0214-00 Main body ECU could not receive the CAN signal from the engine stop and start ECU for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe Operation	U0001-88 Exterior lighting system Turn the TNS (Parking Lights) and headlights LO on, and turn off other exterior light controls. Interior light control system Continue the controls prior to the interior light malfunction detection for 5 s and turn the light on using the initial value after 5 s have elapsed. Front washer system Stop the front washer control. Blower system Main body ECU power supply condition is on: Turn the blower relay on. Main body ECU power supply condition is off: Turn the blower relay off. U0100-00 Not applicable U0101-00 Not applicable U0121-00 Not applicable U0151-00 Not applicable U0155-00 Interior light control system Continue the controls prior to the interior light malfunction detection for 5 s and turn the light on using the initial value after 5 s have elapsed. Blower system Main body ECU power supply condition is on: Turn the blower relay on. Main body ECU power supply condition is off: Turn the blower relay off. U0214-00 Exterior lighting system Turn the TNS (Parking Lights) and headlights LO on, and turn off other exterior light controls. Windshield wiper system Continue the controls prior to the windshield wiper malfunction detection. Front washer system Stop the front washer control.
Trouble Area	Malfunction in CAN bus communication line Malfunction in CAN line between ECM and main body ECU Malfunction in CAN line between TCM and main body ECU Malfunction in CAN line between brake actuator and main body ECU Malfunction in CAN line between center airbag sensor assembly and main body ECU Malfunction in CAN line between combination meter and main body ECU Malfunction in CAN line between engine stop and start ECU and main body ECU