DTC U0323-00: Software Incompatibility with Instrument Panel Control Module [07/2015 - 08/2018]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U032300	Software Incompatibility with Instrument Panel Control Module	Combination meter error	Check engine light: OFF Master warning light: OFF Charging system warning light: OFF Engine oil warning light: OFF Wrench warning indicator light: OFF	DTC stored	Not applicable	Drive cycle: 1 Monitor item: Other Self test type: CMDTC self test, KOEO self test, KOER self test

DTC DETECTION CONDITION	Combination meter error
DTC DETECTION CONDITION	When any of the following conditions is met: CAN communication line malfunction between combination meter and ECM Combination meter internal malfunction Diagnostic support note This is a continuous monitor (other). The check engine light does not illuminate. FREEZE FRAME DATA (Mode 02) is not available. Snapshot data is available. DTC is stored in the ECM memory.
FAIL-SAFE OPERATION	Not applicable
TROUBLE AREA	CAN drive error (combination meter or ECM) CAN communication line malfunction between combination meter and ECM Combination meter terminal D55-13-Main body ECU terminal E1-18 Combination meter terminal D55-14-Main body ECU terminal E1-2 Main body ECU terminal A1-2-ECM terminal A42-9 Main body ECU terminal A1-14-ECM terminal A42-22 Combination meter connector or terminals malfunction ECM connector or terminals malfunction Combination meter malfunction ECM malfunction