DTC P061B-00: Internal Control Module Torque Calculation Performance [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
P061B00	Internal Control Module Torque Calculation Performance	Internal control module torque calculation performance problem	Check engine light: ON Master warning light: OFF Charging system warning light: OFF Engine oil warning light: OFF Wrench warning indicator light: OFF	DTC stored	Applicable	Drive cycle: 1 Monitor item: CCM Self test type: CMDTC self test, KOEO self test, KOER self test

DTC DETECTION CONDITION	Internal control module torque calculation performance problem
DTC DETECTION CONDITION	Indicates an error occurred in the ECM. There is a malfunction in the sensor input signal to the ECM. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the ECM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 02)/Snapshot data is available. DTC is stored in the ECM memory.
FAIL-SAFE OPERATION	Restricts the upper limit of the engine speed.
TROUBLE AREA	ECM connector or terminals malfunction ECM malfunction
SYSTEM WIRING DIAGRAM	Not applicable