DTC P0610-00: Control Module Vehicle Options Error [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
P061000	Control Module Vehicle Options Error	ECM vehicle configuration error	Check engine light: ON Master warning light: OFF Charging system warning light: OFF Engine oil warning light: OFF Wrench warning indicator light: OFF	DTC stored	Not applicable	Drive cycle: 1 Monitor item: CCM Self test type: CMDTC self test, KOEO self test, KOER self test

DTC DETECTION CONDITION	ECM vehicle configuration error
DTC DETECTION CONDITION	ECM data configuration error. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the ECM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. DTC is stored in the ECM memory.
FAIL-SAFE OPERATION	Not applicable
TROUBLE AREA	Configuration procedure has not been completed ECM connector or terminals malfunction ECM malfunction
SYSTEM WIRING DIAGRAM	Not applicable