Confirmation Driving Pattern

Repeatability Verification Procedure 

1. Drive the vehicle at a speed of 40 km/h {25 mph} or more.
2. Shift to 3rd gear and rapidly accelerate the vehicle to 60 km/h {37 mph} (to execute misfire monitor).
3. Release the accelerator pedal and decelerate the vehicle to 40 km/h {25 mph}.
4. Repeat Step 1 to 3 operations above 5 times.

   HINT: 

   • Match the engine coolant temperature in the recorded FREEZE FRAME DATA (Mode 02)/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
5. Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the FREEZE FRAME DATA (Mode 02)/snapshot data.