| DTC DETECTION CONDITION |
Cold start IAC system performance problem |
| Determination conditions |
- The difference between the actual engine speed and the target engine speed is 100 rpm or more.
|
| Preconditions |
- Engine speed: 500 rpm or more*
- Engine coolant temperature: 0-45 °C {32-113 °F}*
- Catalytic converter estimated temperature: 380 °C {716 °F} or less*
- Vehicle speed: 0 km/h {0 mph}*
- The following DTCs are not detected:
- ECT sensor No. 1 malfunction: P0116-00, P0117-00, P0118-00
- MAP sensor malfunction: P0069-00, P0107-00, P0108-00
- BARO sensor malfunction: P2228-00, P2229-00
- Combination meter malfunction: P2610-00
*: Value can be verified by displaying PIDs using Techstream |
| Malfunction determination period |
|
| Drive cycle |
|
| Self test type |
|
| Sensor used |
- CKP sensor
- ECT sensor No. 1
|
| FAIL-SAFE OPERATION |
- Limits intake air amount
- Stops high pressure fuel pump control
|
| VEHICLE STATUS WHEN DTCS ARE OUTPUT |
- Illuminates check engine light.
|
| TROUBLE AREA |
- Air suction in intake air system
- Drive-by-wire control system malfunction
- Throttle valve malfunction
- ECM malfunction
|