LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2020 >> 4Runner TRD Pro >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> Freeze Frame Data [08/2019 - ] >> Freeze Frame Data [08/2019 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [08/2019 - ]

  1. DESCRIPTION 
    1. When a pre-collision system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle (ECU or sensor) state as Freeze Frame Data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2019 - 08/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2021 - ] 

    5. According to the Techstream display, select a DTC that stored freeze frame data.
    6. Read the freeze frame data recorded when the DTC was stored.
      BODY ELECTRICAL > PRE-COLLISION 2

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Turn Light RH Turn signal switch (right) status ON or OFF ON: Turn signal switch (right) on
      OFF: Turn signal switch (right) off      		 -
      Turn Light LH Turn signal switch (left) status ON or OFF ON: Turn signal switch (left) on
      OFF: Turn signal switch (left) off      		 -
      PCS OFF Switch Pre-collision system on/off status ON or OFF ON: Pre-collision system on
      OFF: Pre-collision system off      		 -
      PCS Indicator "Pre-Collision System Malfunction Visit Your Dealer" display request signal ON or OFF ON: "Pre-Collision System Malfunction Visit Your Dealer" display requested
      OFF: "Pre-Collision System Malfunction Visit Your Dealer" display not requested      		 -
      PCS Disabled Indicator "Pre-Collision System Unavailable" display request signal ON or OFF ON: "Pre-Collision System Unavailable" display requested
      OFF: "Pre-Collision System Unavailable" display not requested      		 -
      Pre-Collision Safety Warning Buz Pre-collision system warning buzzer Valid or Inval Valid: Pre-collision system warning buzzer operation possible
      Inval: Pre-collision system warning buzzer operation not possible      		 -
      Pre-Collision Brake Pre-collision braking function Valid or Inval Valid: Pre-collision braking operation possible
      Inval: Pre-collision braking operation not possible      		 -
      PBA Start Pre-collision brake assist activation signal OFF, Standby, Assist Lv1 or Assist Lv2 OFF: Pre-collision brake assist not operating
      Standby: Brake pedal not depressed during pre-collision brake assist operation
      Assist Lv1: Brake pedal depressed during pre-collision brake assist operation
      Assist Lv2: Brake pedal firmly depressed during pre-collision brake assist operation      		 Signal status changes when the pre-collision brake assist is activated before a crash (Pre-collision brake will activate only in situations where the driver depresses the brake pedal)
      Brake Assist Standby - - - Not applicable to this vehicle
      Pre-Collision Brake Control Pre-collision braking operational status ON or OFF ON: Pre-collision braking operating
      OFF: Pre-collision braking not operating      		 -
      AVS Start - - - Not applicable to this vehicle
      VGRS Start - - - Not applicable to this vehicle
      PBA Control Pre-collision brake assist operational status Valid or Invalid Valid: Pre-collision brake assist control operation possible
      Invalid: Pre-collision brake assist control operation not possible      		 -
      Pre-Collision Safety Brake Ind Pre-collision system alarm warning message status ON or OFF ON: Displayed
      OFF: Not displayed      		 "BRAKE!" is displayed
      PCS Crash Alarm Buzzer Pre-collision system warning buzzer status ON or OFF ON: Pre-collision system warning buzzer sounding
      OFF: Pre-collision system warning buzzer not sounding      		 -
      Front Radar-Low Voltage History Millimeter wave radar sensor assembly low voltage history ON or OFF ON: History of low voltage
      OFF: No history of low voltage      		 If the engine starts 1 second or more after the ignition switch was turned to ON, this item may change to ON
      Front Recognition Camera-Malfunction History Forward recognition camera system unavailable history ON or OFF ON: History of being unavailable
      OFF: No history of being unavailable      		 -
      Control Mode ECU control mode status Normal or Check Mode Normal: Normal operation
      Check Mode: Operating in control mode      		 -
      PCS Operation State Retention Setting PCS operation state retention setting customize setting ON or OFF ON: Customize setting set to ON
      OFF: Customize setting set to OFF      		 -
      PCS Alarm Activation Distance Retention Setting 1 PCS alarm activation distance retention setting 1 customize setting ON or OFF ON: Customize setting set to ON
      OFF: Customize setting set to OFF      		 -
      PCS Alarm Activation Distance Retention Setting 2 PCS alarm activation distance retention setting 2 customize setting ON or OFF ON: Customize setting set to ON
      OFF: Customize setting set to OFF      		 -
      PCS Alarm Activation Distance Retention Setting 3 PCS alarm activation distance retention setting 3 customize setting ON or OFF ON: Customize setting set to ON
      OFF: Customize setting set to OFF      		 -
scientia non olet · About LEMON Manuals