Front Passenger Side Index Function does not Operate [06/2016 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MASTER SWITCH
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   P Door Courtesy SW	Front passenger side door courtesy light switch signal / ON or OFF	ON: Front passenger side door opened OFF: Front passenger side door closed	-

   OK

   On the Techstream screen, ON or OFF is displayed accordingly.

Result: 

NG 

GO TO LIGHTING SYSTEM (Door Courtesy Switch Circuit) 

(Refer to Door Courtesy Switch Circuit [06/2016 - ] )

Result: 

OK 

See step  2

1. Initialize the power window regulator switch assembly (Refer to INITIALIZATION [06/2016 - ] ).
2. Check the power window regulator switch assembly is operated (Refer to OPERATION CHECK [06/2016 - ] ).

   OK

   Front passenger side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   NG	A
   OK	B

Result: 

B 

END 

Result: 

A 

See step  3

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MASTER SWITCH
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Current P Door Glass Position Information	Glass position of the passenger side power window / -100 to 700	-	-

   OK

   Pulse generation.

Result: 

NG 

See step  6

Result: 

OK 

See step  4

1. Check the power window regulator switch assembly operates (Refer to OPERATION CHECK [06/2016 - ] ).

   OK

   Front passenger side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate (Does not window glass operate)	A
   Does not operate	B

Result: 

B 

REPLACE POWER WINDOW REGULATOR ASSEMBLY 

Result: 

A 

See step  5

1. Temporarily replace the power window regulator motor assembly with a new or normally functioning one (Refer to REMOVAL [06/2016 - ] ).
2. Check the power window regulator switch assembly operates (Refer to OPERATION CHECK [06/2016 - ] ).

   OK

   Front passenger side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate	A
   Does not operate	B

Result: 

A 

END 

Result: 

B 

REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY 

(Refer to REMOVAL [06/2016 - ] )

1. Temporarily replace the power window regulator switch assembly with a new or normally functioning one (Refer to REMOVAL [06/2016 - ] ).
2. Check the power window regulator switch assembly operates (Refer to OPERATION CHECK [06/2016 - ] ).

   OK

   Front passenger side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Does not operate	A
   Operate	B

Result: 

B 

END 

Result: 

A 

See step  7

1. Temporarily replace the power window regulator motor assembly with a new or normally functioning one (Refer to REMOVAL [06/2016 - ] ).
2. Check the power window regulator switch assembly operates (Refer to OPERATION CHECK [06/2016 - ] ).

   OK

   Front passenger side door power window operates normally.

   RESULT
   
   

   Result	Proceed to
   Operate	A
   Does not operate	B

Result: 

A 

END 

Result: 

B 

REPLACE POWER WINDOW REGULATOR ASSEMBLY