LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2020 >> 86 Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Diagnostics & Circuit Tests >> Lighting System >> System Description [03/2017 - 12/2017] >> System Description [03/2017 - 12/2017]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Description [03/2017 - 12/2017]

  1. ILLUMINATED ENTRY SYSTEM 
    1. The illuminated entry system has the following control functions:
      Control Outline Lights that Operate
      Actuation Area-linked*1 When a registered key enters any actuation area around the doors, the lights that operate turn on.
      • Engine Switch Illumination
      • Map Light
      When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.
      Door Lock/Unlock-linked When any door is unlocked, the lights that operate turn on.
      • Engine Switch Illumination*1
      • Ignition Key Cylinder Light*2
      • Map Light
      When all doors are locked, the lights that operate turn off.
      Door Open/Close-linked When any door is opened, the lights that operate turn on.
      • Engine Switch Illumination*1
      • Ignition Key Cylinder Light*2
      • Map Light
      When all doors are closed, the lights that operate turn off.
      Engine Switch-linked*1 When the engine switch is turned from on (ACC or IG) to off, the lights that operate turn on.
      • Engine Switch Illumination
      • Map Light
      When the engine switch is turned from off to on (ACC or IG), the lights that operate turn off.
      Ignition Switch-linked*2 When the ignition switch is turned from ON or ACC to off, the lights that operate turn on.
      • Ignition Key Cylinder Light
      • Map Light
      When the ignition switch is turned from off to ON or ACC, the lights that operate turn off.
      Delay When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
      • An actuation area-linked function is used.*1
      • The door unlock-linked function is active.
      • Any door is opened and then all doors are closed when the ignition switch is off.
      • Engine Switch Illumination*1
      • Ignition Key Cylinder Light*2
      • Map Light
      Battery Saving When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
      HINT: 
      Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
      • The ignition switch is turned to ACC or ON
      • Any door is opened and closed
      • The luggage compartment door is opened and closed
      • Any door is unlocked
      • The key enters any exterior actuation area*1
      • Engine Switch Illumination*1
      • Ignition Key Cylinder Light*2
      • Map Light
      • Luggage Compartment Light
      • *1: w/ Smart Key System
      • *2: w/o Smart Key System