System Description [06/2016 - ]

WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
1. This system locks and unlocks the vehicle doors remotely. The wireless control system has the following features:
  - The door control receiver performs the code identification procedure and the main body ECU (network gateway ECU) operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU (network gateway ECU).
  - A key-integrated type transmitter is used and it contains the following 4 switches: the door lock switch, door unlock switch, luggage open switch and panic switch.

FUNCTION OF MAIN COMPONENTS

Component	Function
Door control transmitter module set sub-assembly	Has lock, unlock, luggage open and panic switches. Transmits weak radio waves (recognition codes and function codes) to the door control receiver. Illuminates indicator light (LED) during transmission.
Door control receiver	Receives weak radio waves from the door control transmitter module set sub-assembly and sends them to the main body ECU (network gateway ECU).
Front door courtesy light switch LH/RH Luggage door courtesy light switch	Turns on when a door is opened and turns off when it is closed. Outputs door status signals (open or closed) to the main body ECU (network gateway ECU).
Front door lock assembly LH Front door lock assembly RH	Built-in motor locks or unlocks door.
Main body ECU (network gateway ECU)	Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each ECU.

SYSTEM FUNCTION

The door control transmitter module set sub-assembly has door lock switch, door unlock switch, luggage open switch and panic switch. Operating these switches activates each function. The wireless door lock control system has the following functions:

HINT:

The default setting of the functions are on. Some of these functions can be customized (Refer to CUSTOMIZE PARAMETERS [06/2016 - ] ).

Function	Outline
All door lock function	Pressing the lock switch locks all doors.
All door unlock function (Unlock 2 operation)	Pressing the unlock switch twice within 5 seconds unlocks all the doors after the driver door is unlocked.
Luggage compartment door open	Pressing the luggage door open switch of the door control transmitter module set sub-assembly for longer than about 0.8 seconds opens the luggage compartment door.
Answer-back function (Hazard warning light)	Hazard warning lights flash once when doors are locked, and flash twice when doors are unlocked to indicate that the request has been completed.
Answer-back function (Wireless door lock buzzer))	Wireless door lock buzzer sound once when doors are locked, and sound twice when doors are unlocked to indicate that the request has been completed.
Panic alarm function	Pressing the panic switch of the door control transmitter module set sub-assembly for longer than about 0.8 seconds causes the following alarms to activate: Sound the vehicle horns. Blinks the headlights, hazard warning lights and taillights. Illuminates the interior lights (when the interior light door switch on). While the panic alarm is operating, pressing any switch of the door control transmitter cancels the alarm operation.
Vehicle Position Sensing Function*	The vehicle position sensing function is a function that sounds the vehicle horn and flashes the hazard warning lights by operating the door control transmitter module set sub-assembly in order to indicate the vehicle's position to the user.
Door ajar warning function	The buzzer sounds when the lock switch is pressed when any of the doors are ajar, and it sounds for 10 seconds continuously. The buzzer stops when all doors are closed or the unlock switch is pressed.
Automatic locking function	If no doors are opened within 30 seconds after being unlocked by wireless door lock control, all doors are locked again automatically.
Illuminated entry function	When all the doors are locked, pressing unlock causes the interior light to come on simultaneously with the unlock operation.
Self-diagnostic function	The system enters self-diagnostic mode under the following conditions. If the door control receiver receives normal radio waves from the door control transmitter module set sub-assembly when the system is in diagnostic mode, it flashes the interior light in a normal pattern that corresponds to the function of each switch.
Transmitter recognition code registration function	Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, built into door control receiver.

*: The default setting for the vehicle position sensing function is off.

TRANSMITTER RECOGNITION CODE REGISTRATION FUNCTION

The table below shows the 3 ID registration function modes by which up to 6 different codes can be registered. The codes are electronically registered (written and stored) in the EEPROM that is contained in the door control receiver.

Mode	Function
Add mode	Adds a newly received code while preserving any previously registered codes. This mode is used when adding a new transmitter. If the number of registered codes exceeds 7 the oldest registered code is cleared first.
Rewrite mode	Clears all previously registered codes and registers only newly input codes.
Confirmation mode	Confirms how many codes are currently registered. When adding a new code, this mode is used to check how many codes already are stored.

CONDITIONS THAT WIRELESS FUNCTIONS DO NOT OPERATE
1. Lock function will not operate when either of the following conditions is met:
  - Any of the doors is open.
  - The key is inserted in the ignition key cylinder.
2. Unlock function will not operate when the following condition is met:
  - The key is inserted in the ignition key cylinder.