Customize Parameters [12/2019 - 11/2023]
- CUSTOMIZE PRE-COLLISION SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Multi-information Display
- Turn the ignition switch to ON.
- Select the setting by referring to the table below.
- Using the steering pad switches, change the customize settings.
HINT:
Each item is displayed on the "Setting" tab on the multi-information display.
PRE-COLLISION SYSTEM SETTINGSDisplay Description Setting Default PCS Turns the pre-collision system function on/off. ON/OFF ON Sensitivity Sets the pre-collision system function warning sensitivity Early/Middle/Late Middle
- Customizing with the GTS
HINT:
The following items can be customized.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Customize Setting / Others.
- Select the setting by referring to the table below.
Others
Tester Display Description Default Setting ECU PCS Function ON/OFF State Stored Refer to the table below Not Stored $00:Not Stored, $01:Stored Forward recognition camera PCS Warning Timing State Stored 1 Refer to the table below Not Stored $00:Not Stored, $01:Stored Forward recognition camera PCS Warning Timing State Stored 2 Refer to the table below Stored $00:Not Stored, $01:Stored Forward recognition camera PCS Warning Timing State Stored 3 Refer to the table below Not Stored $00:Not Stored, $01:Stored Forward recognition camera Customize Setting Description Setting PCS Function ON/OFF State Stored Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON. Not Stored: Not maintained (Pre-collision system always turns on)
Stored: MaintainedPCS Warning Timing State Stored 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. Not Stored: Not maintained (Setting changes to "Middle")
Stored: MaintainedPCS Warning Timing State Stored 2 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on. Not Stored: Not maintained (Setting changes to "Middle")
Stored: MaintainedPCS Warning Timing State Stored 3 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is off. Not Stored: Not maintained (Setting changes to "Middle")
Stored: Maintained