DTC C1AA0: Front Camera Module Circuit [08/2015 - ]: Procedure

1. Check if the stored DTCs are current DTCs.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes
5. Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
   RESULT
   
   

   Result	Proceed to
   DTC C1AA0 is output	A
   DTC C1AA0 is not output	B

Result: 

B 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - ] )

Result: 

A 

See step  2

1. Replace the forward recognition camera (Refer to REMOVAL [08/2015 - ] ).
2. Adjust the forward recognition camera (Refer to ADJUSTMENT [08/2015 - ] ).

Result: 

NEXT 

END