DTC U0416: Invalid Data Received from Vehicle Dynamics Control Module [08/2015 - ]: Procedure

1. Clear the DTC (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
2. Check if the same DTC is output (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
   RESULT
   
   

   Result	Proceed to
   DTC U0122 and U0416 are output	A
   Only DTC U0416 is output	B
   DTC is not output	C

Result: 

A 

Go to U0122 

(Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2015 - ] )

Result: 

B 

CHECK BRAKE CONTROL SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] )

Result: 

C 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - ] )