DTC Check / Clear [11/2015 - 07/2020]

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
5. Check for DTCs.
  Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2015 - 12/2018] , or refer to DIAGNOSTIC TROUBLE CODE CHART [12/2018 - 07/2020]
  
  Body Electrical > Pre-Collision 2 > Trouble Codes
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.
5. Clear the DTCs.
  Body Electrical > Pre-Collision 2 > Clear DTCs