DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [11/2018 - 08/2020]: Procedure

1. Replace the ECM.

   Refer to REMOVAL [11/2018 - 08/2020]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

5. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Enter the following menus: Powertrain / Engine / Trouble Codes.
3. Read the Pending DTCs.

   Powertrain > Engine > Trouble Codes 

   HINT: 

   If no pending DTC is output, the repair has been successfully completed.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END