Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P106A
| Monitor runs whenever the following DTCs are not stored | P0106, P0107, P0108 (Manifold absolute pressure) P0401 (EGR system) P0452, P0453 (Evaporative emission system pressure sensor) |
| Time elapsed at after engine stop | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Auxiliary battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
P106C
| Monitor runs whenever the following DTCs are not stored | None |
| Time elapsed at after engine stop | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Auxiliary battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
| EVAP system pressure sensor malfunction (P0451, P0452, P0453) | Not detected |