LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostics - Introduction >> Power Window Control System >> Customize Parameters [11/2024 - ] >> Customize Parameters [11/2024 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [11/2024 - ]

  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make notes of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Techstream
      1. Turn the ignition switch off.
      2. Connect the Techstream to the DLC3.
      3. Turn the ignition switch to ON.
      4. Turn the Techstream on.
      5. Enter the following menus: Customize Setting / Power Window.
      6. Select the setting by referring to the table below.

        Power Window 

        Tester Display Description Default Setting ECU
        Door Key P/W Up Function This function is used to close the windows by operating the mechanical key. Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        Door Key P/W Down Function This function is used to open the windows by operating the mechanical key. Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit Function This function is used to open the windows using the electrical key transmitter sub-assembly. Disable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        P/W Operation Buzzer W/ Transmit Function Power window buzzer answer-back of wireless function Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        D Window Auto Up This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly LH
        P Window Auto Up This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly RH
        RR Window Auto Up This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. ON 0:OFF, 1:ON Rear power window regulator motor assembly RH
        RL Window Auto Up This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. ON 0:OFF, 1:ON Rear power window regulator motor assembly LH
        P Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly RH
        RR Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Rear power window regulator motor assembly RH
        RL Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Rear power window regulator motor assembly LH
        D Window Auto Down This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly LH
        P Window Auto Down This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly RH
        RR Window Auto Down This function is used to enable or disable the auto down function using the rear power window regulator switch assembly RH. ON 0:OFF, 1:ON Rear power window regulator motor assembly RH
        RL Window Auto Down This function is used to enable or disable the auto down function using the rear power window regulator switch assembly LH. ON 0:OFF, 1:ON Rear power window regulator motor assembly LH
        P Window Auto Down From Driver This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Front power window regulator motor assembly RH
        RR Window Auto Down From Driver This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Rear power window regulator motor assembly RH
        RL Window Auto Down From Driver This function is used to enable or disable the remote auto down function for the rear LH door window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Rear power window regulator motor assembly LH
      7. Enter the following menus: Customize Setting / Warning.
      8. Select the setting by referring to the table below.

        Warning 

        Tester Display Description Default Setting ECU
        Window Open Warning Function Function to enable or disable the window open warning Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
        Proposal Services Function Function to enable or disable the display of a message for suggestion service function ON $00:OFF,$01:Parked,$03:ON Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals