LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2020 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> DTC Check / Clear [08/2017 - 08/2019] >> DTC Check / Clear [08/2017 - 08/2019]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2017 - 08/2019]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2017 - 08/2018] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2018 - 08/2019] 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.
    5. Clear the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2017 - 08/2018] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2018 - 08/2019] 

scientia non olet · About LEMON Manuals