Precaution [12/2015 - 11/2017]
- TROUBLESHOOTING PRECAUTIONS
- If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.
- Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle condition at the time of the malfunction (DTC outputs etc.).
- Be sure to check for DTCs related to other systems. The pre-collision system may be influenced by malfunctions in other systems.
- HANDLING PRECAUTIONS
- When removing and installing the ECU, sensor, switch or other pre-collision system related parts, perform the following:
- Make sure the ignition switch is off unless otherwise specified in the inspection procedure.
- After the removal/installation, check for DTCs and confirm that a normal system code is output.
- IGNITION SWITCH EXPRESSIONS
- The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this service information.
| Expression |
Ignition Switch (Position) |
Engine Switch (Condition) |
| Ignition switch off |
LOCK |
Off |
| Ignition switch ACC |
ACC |
On (ACC) |
| Ignition switch ON |
ON |
On (IG) |
| Engine start |
START |
Start |