October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal [08/2015 - ]: Procedure
- REMOVE CYLINDER HEAD SUB-ASSEMBLY (for Bank 1)
- Remove the cylinder head (Refer to REMOVAL [08/2015 - ]
).
- REMOVE NO. 1 WATER OUTLET PIPE
- Detach the 3 wire harness clamps.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 nuts, bolt and water outlet pipe.
- REMOVE KNOCK SENSOR
- Disconnect the 2 sensor connectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 bolts and 2 sensors.