How To Proceed With Troubleshooting [08/2015 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Using the Techstream, inspect the CAN communication function to make sure that there are no malfunctions in the communication system (Refer to DTC CHECK / CLEAR [08/2015 - ] ).

   Result

   Result	Proceed to
   No DTCs are output	A
   DTCs are output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to DIAGNOSIS SYSTEM [08/2015 - 08/2019] , or refer to DIAGNOSIS SYSTEM [08/2019 - 08/2021] , or refer to DIAGNOSIS SYSTEM [08/2021 - 08/2022] , or refer to DIAGNOSIS SYSTEM [08/2022 - ] )

Result: 

A 

See step  4

1. Using the Techstream, inspect the LIN communication function to make sure that there are no malfunctions in the communication system (Refer to DTC CHECK / CLEAR [08/2015 - ] ).

   Result

   Result	Proceed to
   No DTCs are output	A
   DTCs are output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2019 - 08/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2022 - ] )

Result: 

A 

See step  5

1. Refer to the Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [08/2015 - ] ).

   Result

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Data List/Active Test (Refer to DATA LIST / ACTIVE TEST [08/2015 - ] ).
2. Terminals of ECU (Refer to TERMINALS OF ECU [08/2015 - 12/2016] , or refer to TERMINALS OF ECU [12/2016 - 08/2019] , or refer to TERMINALS OF ECU [08/2019 - 08/2022] , or refer to TERMINALS OF ECU [08/2022 - ] ).

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

END